View attachment 883 View attachment 884 View attachment 885 Here is what I did to my 2006 911 CDC. Found the recess on e-bay for about $80. Removed the front panel to check for wiring and clearance. Taped out the location with masking tape made the cut with a good jig saw. Had recently replaced carpet and had enough left over to carpet the recess. Just didn’t want to step on black medal in SE Ga during the summer! I up graded to an 80 lb Minn Kota and it moves my boat much better than the original 70 did. I contemplated going to a 36 volt but didn’t want the extra weight and expense. And yes it was nerve racking cutting into the deck but all went well Good luck with your project. QUOTE="Daryl Ganske, post: 704979, member: 45422"]I am buying an Ultrex trolling motor for my 2001 Nitro 911 CDC in the near future and will need to install a bigger recess tray for the larger Ultrex pedal. Which tray works best in a Nitro? I currently have a 24 volt trolling motor. Should I step up to the 36 volt? Thanks for any suggestions.