Search results

Congrats! I have never seen that color combo, looks great.

Jim i ran to Advent cove after getting gas last Wednesday. The ride back was quite the experience. Very similar to what Mike is describing. It was the first time being able to use the hot foot and wheel trim like you described. It made all the differance in the world. Although, I did miss one...

Since 2003!

I dont post much here anymore, but still lurk plenty. Joined in 03 and have made a few good friends and ganed a heck of a lot info along the way. WELL DONE HERE RICH. as posted on the home page: "Ground rules and guidelines for fair play: The primary mission of this website is to promote...

My Z8 will Blow Out while getting on plane as well. Just get used to working the trim and throttle to find the best combo. The boat is a rocket out of the hole with the 225opti. You do not need to trim all the way up to achieve hole shot. GregD

no need to unplug your connector while launching your boat. Lights and connections are water proof.

Personal preference would be to go with the Z8. The 20'1" platform is plenty big enough for 3 on the front deck. The rear deck is also expansive. The 225 will push nicely, you will not be disappointed! the 901 was a great hull and I always wanted to upgrade from my 882 to the 901. But, at 10...

I was on Winnisquam Saturday. Smallies just setting up. Some were aggresive while others left there beds when we picthed at them. Caught quite a few bucks crusing the shallows. Newfound will be ripe first week of June for sure. Jim I will be looking for you over next couple of weeks. Let...

Dan Look around for a pro staff boat. You might find one with a 225 and loaded with options for less. I was able to pick up a 1 yr old boat from a local pro staffer that i know fairly well. Fully loaded with a 225 opti for 32k. Boat had a sticker price at close to 47k if purchased new. I...

Steven I am running 225 otpi (not proxs) with a 26p Fury prop. I have seen 72mph at WOT. perfect conditions and running with tourney load of equip, 1/4 tank fuel and no passenger. Don't think there is much more in the tank without getting the prop worked. The ProXS has carbon fiber reeds and...

Need or Recommend.... are we not talking about the same thing here? Bottom line, like you said. the wiring is inferior. The current draw is to high for the gauge of wire used at factory. Best to run a home run with fuse block and toggle switch dedicated to electronics :D GregD

also check the power supply to both units. they MUST have dedicated power supply from battery not from accessory power switch on dash. I Recommend a quality power/toggle switch to positively shut power dower off to units when not in use. I had a very similar issue to this in the past. I also...

Good looking rig Toxic, Similar colors of the 929? Im sure youll have it gleaming and looking new in no time. GregD

agree with TJ, not a fan of the Johnny Morris line of equip. I use the Bionic Blade rods and have had great luck with them. However all my reals are Shimmanno. looking at the new Quantum bait casters. My Curados are getting old and the new reels are much better than the ones I have. GregD

I find the Cabelas store to be a bit on the boring side. I went there 2 years ago and bought lawn chairs. Did you know that there is a new Bass Pro store opening in Hooksett NH. Not to far for you, maybe you can get a new hat to go with the new shoes.. GregD

Your expecting a lot from the 115OPTI, 5800rpms is cranking that motor up. You can invest in having the prop reworked, adding cupping and balancing the prop will improve hole shot and cornering for sure. any added speed will be minimal 1-3mph. 52mph GPS is pretty respectable if you ask me...

Trep, i bought the Yumbrella rig. It was faily inexpensive and being from NH I dont feel there is a use of this rig. But i had to try it out becuase it looks realy cool in the water. I can only have 1 hook here, so i rigged the middle bailt with a jig head and the teasers had Do It Hitching...

How can such a decorated solder survive multiple deployments to Iraq and Afghanistan. To be murdered by a fellow solder on American soil. Absolutely disturbing and infuriating!

Anyone interested in purchasing this boat, should do with great confidence. I purchased my 2011 Z8 from Mike and could not be more happy with the overall condition and the experience working with Mike on my purchase! GregD

This is my GoPro video that helped me sell my 2001 NX882 in 4 days. Posted a link on Craigs list with my add for the boat. http://www.youtube.com/watch?v=ADyrlLdY_uI