Mike Wagner
Well-Known Member
- Joined
- Feb 18, 2012
- Messages
- 78
- Reaction score
- 0
I just completed the break in for my 150 Pro XS "by the book", and trimmed it up for the first time. At WOT, and trimmed to 1/2 on the trim gauge, my GPS speed ranged from 58 to 60, and my RPM's were 5200-5300.
My question is- 5250 is the low end of recommended WOT RPM's according to the book. Am I ok where I am, or should they be higher? I know that "lugging" is not good for the motors. FYI, I am running a Tempest 24 plus and have a total of 5 hours on the motor.
Thanks,
Mike
My question is- 5250 is the low end of recommended WOT RPM's according to the book. Am I ok where I am, or should they be higher? I know that "lugging" is not good for the motors. FYI, I am running a Tempest 24 plus and have a total of 5 hours on the motor.
Thanks,
Mike