Brian Gallion
New Member
- Joined
- Jun 11, 2002
- Messages
- 2
- Reaction score
- 0
I am wondering if I am going in the right direction with adjusting my trailer.
I have a 1992 DC2000 Nitro and just put it on a new Load Rite trailer. The first time I loaded the boat at the ramp, the bow wanted to go under the bow roller. So, after pulling the rig up some, I winched it on.
I would like to float it on, since I fish by myself after work alot of the time.Anyway,should the bunks be adjusted up on the back end of the trailer? Right now it sits alittle high in the front, but the bow roller is set at its lowest level on the winch post.It seems to me the bunks should be level with trailer or slightly higher in the rear.
Please, if anyone was some ideas, let me know before I start jacking and wrenching on this thing!
Thanks a bunch.
Fishon
I have a 1992 DC2000 Nitro and just put it on a new Load Rite trailer. The first time I loaded the boat at the ramp, the bow wanted to go under the bow roller. So, after pulling the rig up some, I winched it on.
I would like to float it on, since I fish by myself after work alot of the time.Anyway,should the bunks be adjusted up on the back end of the trailer? Right now it sits alittle high in the front, but the bow roller is set at its lowest level on the winch post.It seems to me the bunks should be level with trailer or slightly higher in the rear.
Please, if anyone was some ideas, let me know before I start jacking and wrenching on this thing!
Thanks a bunch.
Fishon