Guest

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Major Mark

Well-Known Member
Joined
Sep 27, 2004
Messages
300
Reaction score
13
Location
Milwaukee, WI & Adams County, WI
Recieved & installed my new Guest 2631 charger Saturday. Now I have a slight issue that I could use some help with. I have a Marinco power inlet adapter for the plug on my Dual Pro charger cord to come up thru the deck. The Guest plug is much larger & won't fit thru the inlet. I do not want to cut the cord end off & put in a hardwired inlet. The Guest paperwork refers to an Guest inlet for their plug, but am unable to locate one anywhere. Anyoner know where to get Guest accesories?
 
appreciate the reply Steve...that inlet is readily available, but that one requires cutting off the factory end & hard wiring on the inlet. According to the Guest documents included with the charger, Guest makes an inlet that the original plug end just clips into without cutting/rewiring. Hopefully Sue will chime in during the week with a supplier I can buy the Guest inlet from.
 
Major,



You can get the Connect Charge inlet through West Marine either at one of their stores or on line at www.westmarine.com.





Sue
 
My bad Mark....I thought it was the one that just snaps the plug into it.:eek:

No use cutting wires if you don't have to.
 
http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&productId=14773



Is this the one Sue? It looks like it requires wiring the cord to a new prong end by the photo...
 
Nope, that's the inlet that you hardwire. Here is a link to the easy one.



http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&keyword=4889903&jspStoreDir=wm51&productId=123421&resultCt=1&catalogId=10001&ddkey=SiteSearch



Sue
 

Latest posts

Back
Top