Boat Plug for '99 Nitro 205 Sport

[Matt4:19]

I am needing to replace the bottom plug on my 99 Nitro F/S. It looks like the tip broke off and the previous owner used plyers on it. I searched on Google and can't find what I need. Any help is appreciated. Thanks in advance!

 

[cceguy]

If you are referring to the drain plug, it's probably 1/2" NPT, available at most hardware stores. Take the broken one with you to compare.

 

[Matt4:19]

My drain plug is plastic and screws into a plastic receiver that has rivets on 2 sides. It looks like this one: https://a.co/d/agzs2an.
Is there a way to replace just the plug or do I have to drill out the rivets and replace the assembly?
The piece you turn with your finger/thumb is broke off and the previous owner used some kind of pliers to remove/install the plug.

 

[DONAOL]

My drain plug is plastic and screws into a plastic receiver that has rivets on 2 sides. It looks like this one: https://a.co/d/agzs2an.
Is there a way to replace just the plug or do I have to drill out the rivets and replace the assembly?
The piece you turn with your finger/thumb is broke off and the previous owner used some kind of pliers to remove/install the plug.

Just a heads up. I’m sure you’ll be able to find a replacement plug. But get two. Maybe you’ll never need the spare, but you’ll have one.

 

[Robertalan9911]

Just a heads up. I’m sure you’ll be able to find a replacement plug. But get two. Maybe you’ll never need the spare, but you’ll have one.

Drive a flat blade screwdriver into center of plastic plug then turn it counterclockwise to take it out and bring to any hardware store. Because it's 1999 model chances are good it is inch threads they will have a plug that will fit it(it should be plastic,stainless steel or brass so it doesn't corrode)