'16 170 Pro Unit on Bow?

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PaDubs

Member
Joined
Oct 30, 2022
Messages
5
Reaction score
0
Location
SE PA
Can I run a Humminbird Power Cord by splicing it to the wired that feed the bow light plug? Im trying to power a Solix 10, simple down imaging on the transducer. No fancy gadgets. Thanks in advance!
 

Attachments

  • plug.jpg
    plug.jpg
    218.8 KB · Views: 0
That circuit has too much resistance for the amps that a SOLIX has. It probably won't even start up.
 
Thank you Wayne. You suggest I go the hard route and run it straight to the battery?
 
My 2022 Classic XL has a pair of wires ran for an up from graph. They were under the trolling motor plug.

The wires for the light aren't a good idea. I see people recommending 10 gauge wire all the time. Overkill is good, but it simply isn't necessary. 14 gauge is plenty big enough.
 

Latest posts

Back
Top