Rusty Howard3
New Member
- Joined
- May 13, 2013
- Messages
- 3
- Reaction score
- 0
I am trying to change the impeller on a 06 optimax 150. I've removed the bolt attached to the anode near the cavitation plate and I've loosened the two bolts on the sides up near the front and the one at the front of the motor.Following this I shook the motor vigorously and beat on it with a rubber, but couldn't break the seal. My questions are, am I missing a bolt or bolts or is there something else going on that I cant seperate the motor. BP has changed the last two for me, but I didn't want to wait a couple of weeks. Thanks for your help.