700lx 90hp Prop

[Cooper Syvertsen]

I have a 2000 700Lx with a 90hp. Currently it’s running a chewed up solas myth 13x19 and at WOT I am over reving.

Looking for some advise on the prop I should get.

I was thinking 13x21 but I’m not sure how much of my chewed up is causing the over rev part. Beyond a under pitched prop.

What’s everyone running for the 700 and a 90. Either aluminum or stainless

 

[crackett]

I have a 2014 115 pro xs 2 stroke just ordered a mercury spitfire 19 pitch 4 blade if that helps

 

[dynamofishing]

I have a 2000 700Lx with a 90hp. Currently it’s running a chewed up solas myth 13x19 and at WOT I am over reving.

Looking for some advise on the prop I should get.

I was thinking 13x21 but I’m not sure how much of my chewed up is causing the over rev part. Beyond a under pitched prop.

What’s everyone running for the 700 and a 90. Either aluminum or stainless

hello I have a 97 700 lx it has a 120 tracker and came with n aluminum prop could not get the boat over 38 MPH my suggestion is not only go up in pitch but try a steel prop I am not sure what kind of numbers your getting right now but I think that would be a nice place to start

 

[TundraNitro]

I have a 2002 700LX 90hp and I have a few props and have tried a lot of props and currently own 4 different stainless. Each I use for different things (weight/tubing..etc)


Powertech NRS3 – 13.25 x 20 x 3, RH 44-46mph (stainless) all around speed/fast outta the hole

Mercury spitfire4 aluminum - 13x17p (38-41mph) was a mistake and the rpms were too high

Solas rubex 4 stainless- 13.75x21p. (44-45mph) fast outta the hole/steers easier/mid speed plane

Mercury Laser2 stainless - 13.5”x24p (unknown)

Would have to say the
powertech #1,
solas #2,
spitfire seems good but u would need like a 13.5”x20p
Mercury laser, I’ll let u know the results next time out