S/S prop

[Bill / NY Kooi]

I need a little help. This not the first prop I've put on but just installed a new prop on my boat. Went from Alum to S/S there is only 1/8" clearance between the prop and torgue fin. This just doesn't look right. I installed this prop a couple of times it is seated correctly. There is no play in the prop and shaft and it turns o'kay. I didn't fire up the boat yet. Does anybody know what the clearance should be. Billy

 

[Rich Stern]

The blades will flex a little under load, so be careful...maybe file down the tab a bit?