The other day I had a battery drain super low on a half day tournament. Battery is new and was fully charged before I left the house. I got to looking and the previous owner didn’t do such a good job at his wiring. Same colored wires for multiple objects, no end connectors/terminal connectors, cris crossed circuits, pumps not wired etc etc. my partner that day is a little better with this kind of stuff and he believes the battery may have drained so quickly due to power leak. I decided I want to re wire all my pumps to their own circuits. So my question is, is this ok to do? And if so what size fuses do I need to run each pump on?
Wiring help
- Thread starter Avery
- Start date
Help Support Nitro Owners Forum:
Avery,
ABYC Color Codes for Boat Wiring
This article will give you some good background info. Note the links to various topics related to your work.
With the standard color code wiring, that was original to your boat, perhaps you can backtrack under the dash using the color codes.
There is enough info on the web to get you through all the details. Locating Ground Faults ("Current Leaks") and Short Circuits
ABYC Color Codes for Boat Wiring
This article will give you some good background info. Note the links to various topics related to your work.
With the standard color code wiring, that was original to your boat, perhaps you can backtrack under the dash using the color codes.
There is enough info on the web to get you through all the details. Locating Ground Faults ("Current Leaks") and Short Circuits
