Wanting To Add Winch Step And Handle

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hortonstn

New Member
Joined
Oct 24, 2018
Messages
3
Reaction score
0
Location
Missouri
2014 nitro z8 want to add the factory winch mounted step and handle like they put on thr 2017-2018. Z20 with the rounded plate can anyone give me the part number and send me a picture
Thanks
 
Call the Tracker Service Center in Springfield and have your hull id number. They will be able to tell you what step fits your boat and cost. If possible pick it up at the service center to save shipping.
 
2014 nitro z8 want to add the factory winch mounted step and handle like they put on thr 2017-2018. Z20 with the rounded plate can anyone give me the part number and send me a picture
Thanks
I looked at the one on my 2016 Nitro Z16 and this is a pretty simple set up. Don’t know why any special considerations need to be made as long as you have the correct length, hook and a business that can see the hook in place, i.e., shoe repair with a large enough machine to do the sewing. I’d use my imagination on this one since the fix is simple.
 
Apr 5, 2018#1
I just finished my step from the tongue to the bow on a 2008 nitroZ7.

After having metal cut and bent took about three hours to weld and paint. Used truck bed liner for the pole and a piece of anti skid runner mat for tongue and step. (Look over the clutter)

92108a88-ef7a-4271-8a98-7bae41126075-jpeg.708
daa78ca5-3337-4318-921f-708ff0752a94-jpeg.709
6a2ab617-10d4-4f13-b91b-c08c0b88c31f-jpeg.710
884e2897-a387-40e3-9033-48ef5737d6f4-jpeg.711
410af4b9-6042-4133-b9c6-8611e6996766-jpeg.712


Bobby Babcock and jerry shack like this.
 

Attachments

  • upload_2019-8-2_11-20-50.jpeg
    upload_2019-8-2_11-20-50.jpeg
    54.7 KB · Views: 63
I have around $125 with the machine shop work, tubing, rubber mat, truck bed spray and misc materials. The pipe was from a muffler shop (2” od. A little bigger than what tracker uses). The rubber step material was from Barbour freight. The u-bolts was from menards.
 

Latest posts

Back
Top