1. Welcome to Nitro & Tracker Owners! Join today, registration is easy!

    You can register using your Google, Facebook, or Twitter account, just click here.

Wanting To Add Winch Step And Handle

Thread in 'Trucks & Trailers' started by Hortonstn, Jul 2, 2019.

  1. Hortonstn

    Hortonstn New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Oct 24, 2018
    Location:
    Missouri
    2014 nitro z8 want to add the factory winch mounted step and handle like they put on thr 2017-2018. Z20 with the rounded plate can anyone give me the part number and send me a picture
    Thanks
     
  2. Dennis

    Dennis New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Jul 27, 2018
    Location:
    SW Missouri
    Call the Tracker Service Center in Springfield and have your hull id number. They will be able to tell you what step fits your boat and cost. If possible pick it up at the service center to save shipping.
     
  3. Bobby Babcock

    Bobby Babcock Member

    Messages:
    19
    Likes Received:
    1
    Joined:
    Sep 20, 2018
    Location:
    Rowlett, Texas
     
  4. Bobby Babcock

    Bobby Babcock Member

    Messages:
    19
    Likes Received:
    1
    Joined:
    Sep 20, 2018
    Location:
    Rowlett, Texas
    I looked at the one on my 2016 Nitro Z16 and this is a pretty simple set up. Don’t know why any special considerations need to be made as long as you have the correct length, hook and a business that can see the hook in place, i.e., shoe repair with a large enough machine to do the sewing. I’d use my imagination on this one since the fix is simple.
     
  5. Duane Mauzy

    Duane Mauzy Well-Known Member

    Messages:
    53
    Likes Received:
    4
    Joined:
    Jan 12, 2012
    Location:
    Missouri
    Apr 5, 2018#1
    I just finished my step from the tongue to the bow on a 2008 nitroZ7.

    After having metal cut and bent took about three hours to weld and paint. Used truck bed liner for the pole and a piece of anti skid runner mat for tongue and step. (Look over the clutter)

    [​IMG][​IMG][​IMG][​IMG][​IMG]

    Bobby Babcock and jerry shack like this.
     

    Attached Files:

  6. Duane Mauzy

    Duane Mauzy Well-Known Member

    Messages:
    53
    Likes Received:
    4
    Joined:
    Jan 12, 2012
    Location:
    Missouri
    I have around $125 with the machine shop work, tubing, rubber mat, truck bed spray and misc materials. The pipe was from a muffler shop (2” od. A little bigger than what tracker uses). The rubber step material was from Barbour freight. The u-bolts was from menards.
     
Loading...
Similar Threads - Wanting Winch Step
  1. Seth Robinson
    Replies:
    0
    Views:
    676

Share This Page