Suggestions on transducer mounting location on my 2010 Z7

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mdgriffin1967

Member
Joined
Mar 16, 2023
Messages
7
Reaction score
2
Location
Hallsville, TX
I could use some advice on the best spot to mount my transducer on the back of my Z7. I hate that I will have to drill holes in the transom to mount it so I want get it right the first time. Should it be down close to the drain plug or on the same level? There’s like two different levels.

Any suggestions?
 
On my z7 they had it mounted here (square with arrow). Just stay clear of your bunks. My new boat they mounted on JP, but then you need to mount a 2d thru hull in bottom of boat for on plane readings.
 

Attachments

  • 20230322_171132.jpg
    20230322_171132.jpg
    2.5 MB · Views: 0
A Tracker dealer suggested the starboard side. Is there any difference which side of the jack plate it’s mounted?
Kinda like the photo attached? I just put it there temporarily with 3M dbl stick tape. I plan to use one of those HDPE plates that glues on the hull then mount the transducer to it.
 

Attachments

  • 8C757230-0E32-492F-9A45-16C1897F4ACF.jpeg
    8C757230-0E32-492F-9A45-16C1897F4ACF.jpeg
    2.2 MB · Views: 0
A Tracker dealer suggested the starboard side. Is there any difference which side of the jack plate it’s mounted?
Kinda like the photo attached? I just put it there temporarily with 3M dbl stick tape. I plan to use one of those HDPE plates that glues on the hull then mount the transducer to it.
That location may be out of the water when your on plane, and wont reasd depth. I'd move to move it down so its flush/at the hull portion of the boat that is on the bunks. Look at picture it sent earlier.
 
Found a pic of my old Z7. This is where mine was. And yes, I forgot it was starbrd.

Hope that helps.
 

Attachments

  • Screenshot_20230323-224043_Signal.jpg
    Screenshot_20230323-224043_Signal.jpg
    269.8 KB · Views: 0
Got it. That makes sense. I should be able to easily move it down just like your photo.
Appreciate the feedback. I’ll let you know how it does. Thanks so much!
 

Latest posts

Back
Top