Good Question

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mark Northcutt

Well-Known Member
Joined
Mar 9, 2001
Messages
94
Reaction score
0
Should the roller on the trailer for the bow of the boat free turn? Mines pretty tight and you have to give it the gas to get the bow eye to connect. Thanks
 
It doesn't need to spin loosely, but you want it to roll when your hull hits it loading so you don't get skid marks on your bow. It should be installed with a wax nut/jam nut that will allow it to hold tight without cinching the fork together causing the roller to stick. Tighten it until the roller does not turn easily by hand then back off one whole turn. It should then turn by hand without being loose. I always have a Stoltz clear bow roller installed to keep the hull nice and clean. Hope it helps.
 

Latest posts

Back
Top