Andrew
New Member
I have a 2015 Tracker Pro Team aluminum boat. I’ve got an HDS Gen 3 on the bow. When I installed it, I couldn’t run the wires through the bow to the fuse box under the console, so I improvised with a cord channel running along the deck.
I’m getting ready to install a new Terrova trolling motor and am also replacing the onboard charger.
I am wondering if anyone can tell me how to get the wiring for the Sonar back to the console.
I tried the first time using fish tape at the access point on the bow, but I see now I may have come in at the wrong angle. Should I try getting the wire from the throttle access panel to the front? Is that easier?
Any help would be greatly appreciated.
I’m getting ready to install a new Terrova trolling motor and am also replacing the onboard charger.
I am wondering if anyone can tell me how to get the wiring for the Sonar back to the console.
I tried the first time using fish tape at the access point on the bow, but I see now I may have come in at the wrong angle. Should I try getting the wire from the throttle access panel to the front? Is that easier?
Any help would be greatly appreciated.
