I'm attempting to winterize my livewells. Issue I'm having is I turn my aux power on, then push any button on the keypad for my livewells/horn/nav lights the lights all blink, the relay clicks and nothing happens. My trim buttons work on the front pad, but aux can be off for those to work.
I have 13.7V at the relay, in/out/s.w power, all tested using the ground pin at the relay. I tried bypassing the relay and the key pad still does not work. I'm actually losing AUX power when i try the buttons, had the GPS on and tried a key pad button and it shut the gps down...
All the wiring looks good at the PME, I have now taken all the wires going to the cranking battery and put them into 1 connector for + and 1 for - to avoid any issues with loose connections.
I'm stuck... not sure if it could be the PME? I don't have a schematic and cant seem to find one!
I have 13.7V at the relay, in/out/s.w power, all tested using the ground pin at the relay. I tried bypassing the relay and the key pad still does not work. I'm actually losing AUX power when i try the buttons, had the GPS on and tried a key pad button and it shut the gps down...
All the wiring looks good at the PME, I have now taken all the wires going to the cranking battery and put them into 1 connector for + and 1 for - to avoid any issues with loose connections.
I'm stuck... not sure if it could be the PME? I don't have a schematic and cant seem to find one!
