2005 882NX Transom Question

[05’ 882NX]

Does anyone know if there is supposed to be a gap between the splash well and transom on the 882NX? I removed the plastic splash cover and noticed about 1/4 inch separation between the two, it looks like it was cut that way? Any feedback or information is greatly appreciated, thanks in advance!

 

[Chobeemauga]

Can you post some pics? I would say probably not supposed to be a gap. Can water get in?

 

[05’ 882NX]

Chobeemauga, thanks for replying. I have included a few photos (not the best lighting). There are no other cracks or signs of stress anywhere on the transom and water is only in that area while idling. When I pulled off the splash guard cover there was a lot of silicone all around this area.

 

[Chobeemauga]

That looks like where the top hull is married to bottom hull. They put that metal cap on to hide that. Totally normal. Re-seal it. Good. Replace the cap. It looks good to me. If it were mine I would do what I said above and send it.

 

[05’ 882NX]

Chobeemauga, thank you for the feedback, much appreciated!

 

[Chobeemauga]

Chobeemauga, thank you for the feedback, much appreciated!

Good luck! There are others here that know a ton more than me. Hopefully they will chime in.