1990 Nitro 165

Nitro & Tracker Boat Owners Forum

Help Support Nitro & Tracker Boat Owners Forum:

1990 Nitro Tracker

New Member
Joined
Nov 20, 2021
Messages
3
Reaction score
0
Location
Connecticut
Hey there! New guy here looking for a little assistance. Trying to pull a steering wheel hub from the column with a puller it's not happening. Don't want to break the white metal hub. Any suggestions? Is there a digital instruction manual someone could sent me with the schematics diagram? Or a new hub that is available. Kindly help. Anthony
 

cceguy

NTO Supporter
NTO Supporter
Joined
Sep 21, 2020
Messages
63
Reaction score
7
Location
Indianapolis, IN
Methods I have used before:
1) Use a brass hammer to hit the shaft while pulling up on the wheel. 2) Have someone pull up on the wheel while you hold a piece of aluminum over the shaft and hit it with a hammer (dead blow works best). 3) Run the nut down until flush with top of shaft. Tape a large washer over the nut. Pull up on the wheel and hit the washer with a hammer. The washer helps protect the threads on the shaft and washer.
 

1990 Nitro Tracker

New Member
Joined
Nov 20, 2021
Messages
3
Reaction score
0
Location
Connecticut
cceguy thanks for the response!!! Glad to hear I didn't miss something like a set screw or a key I thought I might have overlooked. Will get busy Thanks Anthony
 

Latest posts

Top