Search results

Hoping someone can tell me what is going on with my pumpout switch on my console. Have a push button console, pumpout light flashes. What does that indicate.

Ok guys see if you have some ideas, boat porpoises running with wind, and across choppy water, into wind no issues, Here is set up, 200hp Optimax runs strong, 6" set back pro jacker jack plate, 23 pitch 3 blade Tempest Plus prop, set about 3.25" below pad Flat water no issues at all WTO 55mph

Hey Guys, I am having a little issue with a hub on my 2006 oil lube trailer hub, got water in it few weeks ago and replaced races, berrings, and seals. Rear seal was the rubber kind. Went to lake, and looks like water in again. Anybody have any ideas for a fix. THANKS

Guys, just installed mercury vessel view, has water temp. reading, running about 120 or so, is this in the normal range ?

Hey Mr. Farrell, prop plugs are cheap and can be tried really easy, it sounds like your prop is slipping, same thing happened to me when I removed one of the prop plugs. I would sure start with that. Try putting a plug or two in and see what happens. Work from there. Hope this helps a...

Jerry, thanks for your input, I lowered my motor to about 3" below pad, I think that helped a good deal. Waster conditions not the best to really tell. My jack plate is not movable, I know what you are talking about, with the rod in the middle, mine does not have such an animal.

Jerry, thanks again for your input, the jack plate is a slide master as far as I can tell, not many markings on plate, but it is fixed. If were to invest in an adjustable one, any one come to your mind. Would have to be manual budget won't go for other

hey Jerry, thanks for the reply, I was thinking it was too high, and I am running a tempest plus 23 pitch

Hey Guys, I have a 06 901 CDX with 200 optimax with 10" fixed jack plate, in anything but calm water I have to trim all way down to keep from porpoising on me. Flat water no problem, trim up and run 60 mph. Can anybody help ?