Search results

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    fouling plugs

    Mine did the same thing when I bought if used. I took it to the local dealer where there decarborized it and it still fouled plugs. It ended up being bad gas. I ran out the old gas and no more problems since. Oh make sure you do not add any oil to your gas as some mechanics request you do to...
  2. D

    Which battery to hook to

    I am not sure how many amps those lights pull. So you will need to make sure your fuses and wiring can handle the amperage of the lights and one fuse should be fine.
  3. D

    spinner baits please

    Thanks for the offer but not quite the venues I am looking for.
  4. D

    Crankbait Gear Ratio Opinions

    I use higher speed 6.3:1 or 6.4:1 for all my crankbaits except those that go over 16'. The deep divers will wear you out. I fish my baits faster than most and look for the reaction strikes. If I want to slow down I will crank the bait down until it his bottom and pull the rod and then crank up...
  5. D

    Which battery to hook to

    Cranking and starting are the same I think you meant trolling. Reading your post you are installing LED lights so they probably have a low amp draw. Do you ave anything else running off the starting battery? Such as fish finders, gps, radio's, bilge pump, livewell pumps, etc? If you do i would...
  6. D

    spinner baits please

    I live in Cordova just NE of Memphis. Bass club folded up this winter so I need to figure out what I am going to do this year. Don't really want to join another club so I am thinking more BFL or ABA.
  7. D

    LGC 4000 external GPS antenna

    The oil fill is directly above the transducer so that should work out good for my dash unit. Does this mean I should use my internal antenna for my front GPS?
  8. D

    spinner baits please

    My friend and I just started making our own. I bought the wire from a company that turns the wire diameter down on a taper from .041 to .028. So as the wire extends out towards the blade it decreases in size. We have them in 3/8 and 1/2oz sizes. These are not cheap as the wire is $1.65 our cost...
Back
Top