Search results

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Ultrex Foot Control Recess Tray

    Don, did your boat have any fiberglass braces you had to cut out? My 911 CDC has a fiberglass brace on both sides of the tray that runs from the front of the boat back to a bulkhead that runs across the bow right behind the back seat pedestal holes. I’m scared to cut those braces out to install...
  2. D

    Ultrex Foot Control Recess Tray

    Thanks Don for this info and the awesome pictures! I greatly appreciate the help!
  3. D

    Help 1999 911 Cdc Not Getting On Plane Easily

    i c i have a 2001 911 cdc with the 225 EFI and it loves Champion QL77CC plugs per the Mercury Shop Manual. I have to trim the motor all the way down each time I take off and it planes easily. Make sure your prop has at least 2 of the 3 exhaust plastic plugs in it or that may cause problems. I...
  4. D

    Ultrex Foot Control Recess Tray

    I am buying an Ultrex trolling motor for my 2001 Nitro 911 CDC in the near future and will need to install a bigger recess tray for the larger Ultrex pedal. Which tray works best in a Nitro? I currently have a 24 volt trolling motor. Should I step up to the 36 volt? Thanks for any suggestions.
  5. D

    Oil Filled Trailer Hubs

    Thanks guys for all your thoughts! I am going to give the oil a try first and just watch out :)for leaks.
  6. D

    Oil Filled Trailer Hubs

    Thanks For the info Greg! I would like the part numbers if you have them. What gear oil did you use?
  7. D

    Oil Filled Trailer Hubs

    Thanks TOXIC! I figure there some out there still runnIng ok. You only hear about the bad ones.
  8. D

    Nitro 911 Bilge Pump

    I have a 2001 911. My bilge pump has a manuel switch on the left side of the steering wheel and an automatic float switch which is located right in front of the bilge pump just under the fuel tank. I found that all my wires in the bilge were badly corroded and all my pumps ran real slow. I found...
  9. D

    Humminbird 1197 or 998 on a 911CDC

    Thanks for the input guys! I want the 1197 but it is so big I am afraid it will block my view too much when driving. Shortfish, have you ever tried mounting the unit so that the unit bracket and ram ball come straight out behind the middle of the back of the unit so that the unit is positioned...
  10. D

    1991 911 Front Floor Live Well

    The 1991 is a typo. That's the year model of my old boat. It's a 2001. Sorry about that. I think some of the water will drain out of the hose a little, but not drain the livewell when on plane because the overflow hose is at the top of the live well. I know what you are talking about MINI, I had...
  11. D

    Prayers Needed

    Prayers sent from Texas! God Bless her and your family.
  12. D

    911 CDC Engine Heigth and Performance

    Thanks Guys! You're right, I just need to get more used to it before I go messing around with it. My 16' 8" didn't porpoise like this one does.
  13. D

    My rig

    Great looking rig!!
  14. D

    911 CDC

    Thanks Jim and BMCD, Yes, I was able to ride in a 911 before I got this one. A friend of mine has one but I had never driven it. It takes a little getting used to. You drive from the left side like a car. Like BMCD said, You and your partner don't have to cross paths and get in each other's...
  15. D

    Humminbird 1197c mount in a nitro 911?

    My 2001 911 CDC measures about 7" at the bottom and about 8 3/4" at the top between the windshields. Hope this helps!
  16. D

    New 911

    It's got a merc 225 EFI and the boat is Charcoal, Silver, and black. I live in Brenham, fish Somerville quite a bit since it is only 20 minutes from my home. I also fish Fayette County which is about 35 minutes from home. Went to Bastrop today and caught a few. Where do you fish?
  17. D

    Keel Guard

    I need to put a black Keel Shield on my 911. Toxic, Can you get a good price on them?
Back
Top