Separate names with a comma.
Welcome to Nitro & Tracker Owners! Join today, registration is easy!
I posted this in the Trucks and Trailer section but, I not sure everyone reads that section. This one seems more popular.
I have a 1994 Nitro...
I have a 1994 Nitro TF170 with a Trailstar trailer.
After surviving several blowouts, I could really use some new fenders. (blowouts are hard on...
All the threads on tires seem to be from 2013.
What's the latest on tires?
I'm tired of blowing out trailer tires. I don't have excessive weight...
Remove the batteries and the tie down straps, then pull it back to the battery compartment.
If you have battery trays screwed to the floor, it...
I had a 75hp. on my 170TF, I ran a 171/4 x 21p prop. It gave me the maximum RPM of 5250.
I have a Nitro 170TF. It had a 75 hp Mercury on it, it ran about 42-44 (GPS) at 5250 RPM. (I now have a 115 hp on it.)
You need a hydrofoil...
If your boat pulls right, adjust trim tab to pull left.
(trim tab should be facing NNE, like this /
If that's to much, back off a little.
I have a 1994 Nitro 170TF with 262 hrs. on it.
Your steering pulls right because of right-hand torque caused by your prop.
You need to adjust your trim tab to alleviate this.
Cancelled the Halo and ordered a NOCO Genius Boost. Supposed to be the #1 seller and claims to be able to give you 20 jump starts.
I believe that 5250 RPM is supposed to be your maximum RPM. If you're running 5800 RPM, you're over revving your motor.
A 21p prop, keeps it right...
I've got a Nitro 170TF, had a 90 hp on it with a 21p SS prop. It's the right prop for your boat, you need a hydrofoil on your lower unit. It will...
Looks like a good item to have on board. Just ordered one, thanks for the tip!
What's a "halo bolt 58830"?
Nobody that fishes at night can answer this question? I guess everybody gets off the lake before dark.
If you have a good battery, that's fully charged, how long do you run your lights, electronics, etc. at night and still have confidence your motor...
So I have to buy another transducer? How much is that? I assume it has a splitter for both.
What do you mean, "you need a 2nd transducer for that down low"?
Don't have a jackplate. Lowrance suggests I mount it here, as shown in the picture. I think that's too high, the transducer would be out of the...