Tracing wires in my 1800TF

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 8, 2023
Messages
16
Reaction score
6
Location
Vidalia, GA
Okay… I’m trying to get my boat’s nervous system up to snuff and I’ve come across these wires that used to be hooked to the battery. Both of them go forward in a plastic conduit wire run-cool. Then I have what APPEARS to be the same two wires exiting the wire run into a harness connector. However, there’s no continuity with the red wire (black wire is a main ground to the switch panel and helm gauges). What an I missing here? Have you had this issue before? These two wires, the fuel sender wires, and the bilge pump hot are in this run. Thoughts? The boat is an 89 Bass Tracker 1800TF.
IMG_7015.jpeg
IMG_7016.jpeg
 
Back
Top