Brakedust On Rear Wheels On 2018 Nitro Tandem Axle Trailer.

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Donald Watson

Active Member
Joined
Sep 23, 2004
Messages
44
Reaction score
5
Location
Bonita Springs, Fl
I have a 2018 Z20 with a tandem axle trailer with brakes on the rear axle. Every time I use the boat the rear wheels get covered in brake dust. Would like any suggestions why this occurring? eg. brake pads adjusted too tight etc. The trailer has travelled approx. 1000 miles.
 
If your brake pads are tight on the disc they would overheat and burn quickly. Generally, you will find some residue continually as you use the trailer- depending of the amount of heavy breaking you have to do. I have the tandem with a Z18. The brake axle wheels always accumulate some brake residue but not a lot. Take the wheels off and check you brake discs to be sure they seem smooth, and not warped any way.
I've learned it's a good idea to remove all the lug nuts at least one time each year to be sure they dont get stuck or seized. That's an opportunity to roll the wheel bearings by hand to see how they feel. Same thing with the Propeller nut.
 
If your brake pads are tight on the disc they would overheat and burn quickly. Generally, you will find some residue continually as you use the trailer- depending of the amount of heavy breaking you have to do. I have the tandem with a Z18. The brake axle wheels always accumulate some brake residue but not a lot. Take the wheels off and check you brake discs to be sure they seem smooth, and not warped any way.
I've learned it's a good idea to remove all the lug nuts at least one time each year to be sure they dont get stuck or seized. That's an opportunity to roll the wheel bearings by hand to see how they feel. Same thing with the Propeller nut.
Thanks for the tips Larry appreciate it.
 
Back
Top